You have no items to compare.

1. Diamond Cut Burr, Uncoated (UC71G)
2. Diamond Cut Burr, Uncoated (UC33C)
3. Diamond Cut Burr, Uncoated (UC32P)
4. Diamond Cut Burr, Uncoated (UC31P)
5. Diamond Cut Burr, Uncoated (UC44C)
6. Diamond Cut Burr, Uncoated (UC41P)
7. Extra Coarse Cut Burr, Uncoated (UC47XC)
8. Extra Fine Cut Burr, Uncoated (UC47XF)
9. Extra Fine Burr, Uncoated (UC52CXF)
10. Extra Coarse Burr, Uncoated (UC52CXC)
11. Nose Cone Contra Angle (H106)
12. Belt Flat 9/16" x 23" (S440)
13. Belt Flat 9/16" x 20" (S438)
14. Belt Flat 9/16" x 19-3/4" (S436)
15. Belt Flat 9/16" x 19-1/2" (S434)
16. Belt Flat 9/16" x 19-1/4" (S432)
17. Belt Flat 9/16" x 19" (S430)
18. Belt Flat 9/16" x 18-3/4" (S428)
19. Belt Flat 9/16" x 18-1/2" (S426)
20. Belt Flat 9/16" x 18-1/4" (S424)
21. Belt Flat 9/16" x 17-1/2" (S422)
22. Belt 3V-24" Ray Foster Spindle (S414)
23. Belt 2/3M500 (S410)
24. Belt 3M487 (S404)
25. Belt 3M462 (S400)
26. Thumbscrew Only (H108)
27. Motor Pulley 1V-2SP/Demco (S498)
28. Motor Pulley Flat 3-3/4" Dia (S496)
29. Motor Pulley Flat Crown/Wells/Baldor (S486)
30. No 9, No 11, and No 12 Brushes
31. Arbor Band Sandpaper
32. Shaft Guard Red Wing Lathe #1
33. Shaft Guard Red Wing Lathe #2
34. Shaft Guard Wells/Baldor Lathe
35. Arbor Band Taper Shaft 3/4"
36. Thin Econo Taper Shaft
37. Stone Chuck Taper Shaft
38. 3 Jaw Chuck
39. Clasp Polishers
40. Pulley for S031 (S135)
41. Mounted Rubber Points
42. Rubber Wheels, 5/8"
43. Rubber Wheels, 7/8"
44. Spiral Brass Taper Shaft
45. Spiral Taper Shaft
46. Hood and Motor (230V)
47. Hood and Motor (115V)
48. Engine Unit with Short Arm (230V)
49. Engine Unit with Long Arm (230V)
50. Engine Unit with Short Arm (115V)
51. Engine Unit with Long Arm (115V)
52. Brown Mounted Stones